用户工具

站点工具


标准:ethernet:sgmii:start

这是本文档旧的修订版!


SGMII(Media Independent Interface)/ HiSGMII

Ethernet MAC和PHY之间数据传递的一种MII(Media Independent Interface)接口,,SGMII最高支持1000Mbps。

HiSGMII和SGMII接口相同,区别在于时钟,HiSGMII时钟频率为SGMII的2.5倍,速率只支持2.5Gbps。

常用标准

原理图设计

SGMII信号连接如下图:

SGMII各信号的定义见下表:

Table 13: SGMII Signal Definitions
Signal Name Source Description
SGIN±Switch/MACTransmit data. Differential 1.25-Gbd transmit data from the Switch/MAC to the PHY.
SGOUt±PHYReceive data. Differential 1.25-Gbd receive data from the PHY to the Switch/MAC.
SCLK±PHYTransmit clock. Differential 625-MHz clock synchronized to the SGOUT± data. Some
Switch/MACs can recover the clock from the SGOUT± data and do not need the SCLK±. If this is the case, then these pins can be left floating.

PCB设计

  1. 总长度:小于150mm
  2. 等长:Rx和tx两组组内需等长,小于5mil,组间无要求。
  3. 阻抗:差分100Ω
  4. 间距:组间间距至少两倍线宽,推荐3倍线宽。

参考文献

评论

请输入您的评论. 可以使用维基语法:
P B A​ H P
 
标准/ethernet/sgmii/start.1735438598.txt.gz · 最后更改: 2024/12/29 10:16 由 hwwiki